Factory Direct Reverse Osmosis Membrane Domestic RO Membrane for Home Use

• Membrane Type: Hollow
• Type: RO
• Application: Household/Commercial
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 3012-300
• Capacity: 300gpd
• Rejection Rate: 98.5
• Testing Pressure: 100 Psi
• Temperature of Testing Solution .: 25ºC
• Concentration of Testing Solution: 250 Ppm
• pH of Testing Solution: 6.5~8.5
• Recovery of Single Element: 40%
• Transport Package: Carton Pallet
• Specification: 3012-300
• Trademark: Vontron
• Origin: China
• HS Code: 8421999090
• Production Capacity: 1000PCS /Week
• Package Size: 52.50cm * 52.50cm * 36.50cm
• Package Gross Weight: 14.900kg

Product Description

Related Products

                                                     
 

 

Product Description

 

Factory Direct Reverse Osmosis Membrane Domestic RO Membrane for Home Use

Independently developed by VONTRON, the RO element ULP3012-300 is designed for treatment  of low-salinity water resources such as tap water, well water, etc. Working under extra low pressure, it is applicable to water purifying devices for residence, hospital and laboratory.

 

Detailed Photos

 

Product Parameters

Testing Conditions:
Testing Pressure ..................… 100 psi (0.69MPa)
Temperature of Testing Solution .......................... 25ºC
Concentration of Testing Solution (NaCl) ........... 250 ppm
pH of Testing Solution ......................................... 6.5~8.5
Recovery of Single Element..................................40%



 

Model	Permeate flow GPD	Rejection Rate (%)	Min. Rejection (%)	Testing Pressure psi (MPa)	Recovery (%)	Length mm	Diameter mm
ULP1812-50	50	99	97	60 (0.41)	15	298	46
ULP1812-75	75	98	96				46
ULP2012-100	100	99	97				48
ULP3012-300	300	98.5	96.5	100(0.69)	40		73
ULP3012-400	400	98.5	96.5				73
ULP3012-500	500	98	96		50		73
ULP3012-600	600	98	96				73
ULP3012-800	800	97	95				73
ULP3013-400	400	98.5	97.5		40	333	67.8
ULP3013-500	500	98	96				67.8
ULP3013-600	600	98	96		50		67.8
ULP3013-800	800	97	95				67.8

Notice:

1. Any specific application must be limited within the Operating Limits and Conditions. We strongly recommend you to refer to the latest edition of technology manual and design guide prepared by VONTRON Technology Co., Ltd., or consult experts proficient in membrane technology. In case the customer failed to follow the specified operational requirements in the manual, VONTRON Technology Co., Ltd. will assume no liability for all results.
 

2. The permeate flow listed in the table is the average value. The permeate flow of single membrane element is within a tolerance not exceeding ±20% of the nominal value.
 

3. Discharge the permeate water produced during the first hour after system start-up.

4. During storage time and operation time, it is strictly prohibited to dose any chemical medicament that may be harmful to membrane elements. VONTRON Technology Co., Ltd. assumes no liabilitiesfor any above-mentioned misconduct.
 

5. Moisture and pollution should be avoided in transportation. Handle with care to prevent damage.This product should be stored in a ventilated and dry warehouse and should not be stored withcorrosive articles and inflammables.
 

6. Dry membrane elements should always be kept wet after been used. When wet membrane elements are not used for a long time, in order to prevent the growth of microorganisms, it is recommended to soak the membrane elements with a protective solution containing 1.0% sodium bisulfite (food-grade) (prepared with RO water).

Installation and Replacement

 

Packaging & Shipping

 

Company Profile